|
Versatility TDK EUT Monitoring Lab allows you to acquire data from an EUT via an
oscilloscope, a receiver, a spectrum analyzer, a status monitor, or a
dynamic signal analyzer. The software can determine the pass/fail status
of the EUT by comparing the acquired data against pass/fail thresholds.
Performance TDK EUT
Monitoring Lab can acquire and display the following types of data:
- Frequency
- Duty Cycle
- DC Offset
- Peak-to-Peak Voltage
- Analog Voltage
- Digital Signal
Each of these data values may be compared against thresholds. Whenever
a measured value is outside the range of acceptable values, a failure is
reported.
Portability Data acquired by TDK EUT Monitoring Lab can easily be transferred to other TDK
TestLab applications. This information can be displayed in
data tables and graphs along with other test data, giving you access to
all test data in one place. This makes it easy to see what the EUT data
values were at each test frequency.
Features
-
Output signals that can be synchronized with the dwell cycle
-
Storage of commonly used instrument configurations
-
User-definable data channel names
-
Scale factors for transmission link attenuation compensation
-
Minimum and maximum pass/fail thresholds
Minimum
Requirements
|
Computer/Processor
|
Pentium III
recommended
|
|
Memory
|
256
MB of RAM
|
|
Hard
Disk
|
100
MB of available hard disk space
|
|
Operating
System
|
Requires
Windows 2000 or Windows XP
Professional.
|
|
Drive
|
CD-ROM
drive
|
|
Display
|
Super
VGA (800 x 600) or higher-resolution monitor with 256 colors
|
|
Port
|
Parallel
or USB port
|
|
Instrument
Interface
|
National Instruments GPIB interface board
|
Supported Device Types/Manufacturers
Dynamic Signal Analyzers: Hewlett-Packard
Function/Arbitrary
Waveform Generators: Hewlett-Packard
Oscilloscopes: Hewlett-Packard
Receivers: Hewlett-Packard
Spectrum Analyzers: Hewlett-Packard
Base Station Simulator: Rohde & Schwarz,
Hewlett-Packard, Wavetek, Racal
Status Monitors: TDK RF Solutions
Video Controllers: TDK RF Solutions
Ordering Information
Product: TDK EUT Monitoring Lab
Model Number: EUT-LAB
____________________________________________________________________________________________
To place an order or to learn more about the TDK RF Solutions products
that best meet your needs, contact your TDK RF Solutions sales
representative:
TDK RF Solutions Inc.
1101 Cypress Creek Rd.
Cedar Park, Texas 78613 USA
Phone:
+1 (512) 258-9478
Fax: +1 (512) 258-0740
E-mail: info@tdkrf.com
Specifications subject to change without
notice.
|
